Hardware wesupply, installand service

Control board for Sentra AM pedestal systems — drives the transmit/receive loop and triggers the alarm.

Desktop RFID reader that counts a whole carton or assortment in one pass at goods-in.

Combined 58 kHz AM and UHF RFID exit pedestal for stores running both label EAS and item-level RFID.

Light 5.6 kg ABS AM pedestal at 58 kHz for narrow single-door shop entrances.

Transparent acrylic AM pedestal at 58 kHz, 1.6–1.8 m on labels and up to 2.8 m on hard tags.

Slim RF pedestal pair at 7.9–8.5 MHz for tight shop entrances where floor space is scarce.

Single-pedestal RF gate for narrow doorways, using the slim Evolve P20 body.

Wireless alarm hub that arms a shop after hours and pushes intrusion, smoke and gas alerts to a phone.

Counter-top pad for deactivating AM soft labels at the checkout.

Counter pad that deactivates RF soft labels in one pass, whatever way the label faces.

Hand-held magnetic detacher for hard tags, supplied in 10,000 GS and 12,000 GS ratings.

Counter puck detacher for standard hard tags, in 10,000 GS and 12,000 GS ratings.

Single-rating magnetic detacher at 13,500 GS, for locks a standard puck will not shift.

Magnetic hard-tag detacher rated 12,000 GS for everyday till use.

High-force magnetic detacher supplied at 15,000 GS and 16,000 GS for reinforced tag locks.

Passive magnetic detacher for standard hard tags, listed at 10,000 GS and 12,000 GS.

Magnetic detacher rated 9 kG, sized for standard hard tags on a busy checkout.

Flat-faced magnetic detacher for hard-tag pin locks at the till.

Round-faced magnetic detacher for hard-tag pin locks at the till.

Handheld unit for finding a live tag or label after a gate alarm, in AM and RF versions.

Wireless magnetic contact for shop doors, shutters and stockroom windows, paired to the alarm panel.

TagLock's 2-1 build of the DR acousto-magnetic label, for everyday packaged stock on 58 kHz systems.

The 3-1 build of TagLock's DR label, stuck to packaged goods and deactivated at the till.

Sentra-branded 3-1 DR label, the house AM sticker for non-metallic packaged retail stock.

Swing build of the 3-1 DR label, for stock that will not take a stuck-on label.

TagLock's 3-1 (5 mm) DR label build, an everyday AM sticker for packaged non-metallic goods.

Service tool that confirms an EAS gate is transmitting properly, in AM and RF versions.

Gas detector for shop kitchens, food counters and back rooms where LPG cylinders are stored.

Guardia's alarm hub: pairs door, motion, smoke and gas detectors and reports over Wi-Fi or GSM.

Curved ABS AM pedestal reaching 2.0–2.5 m on DR labels — Guardia's wide-exit plastic gate.

Lightweight ABS AM pedestal at 58 kHz, 5.6 kg a side, for standard shop doorways.

Grey aluminium-and-acrylic AM pedestal, 58 kHz, hard tags to 2.4 m.

Grey ABS AM pedestal, ≤15 W, switchable between TX+RX and mono working.

Metal-base AM pedestal at 58 kHz, TX+RX or mono, supplied without a controller.

ABS AM pedestal on the Ultra board, 1.8–2.8 m detection at only ≤15 W.

Cost-led ABS AM pedestal reaching 2.0 m on 68 mm hard tags, 1.5 m on labels.

Acousto-magnetic unit in Guardia's ABS-bodied range; specification to be confirmed on enquiry.

Acousto-magnetic unit in Guardia's ABS range; specification to be confirmed before ordering.

ABS RF pedestal reading 5 × 5 cm labels to 175 cm in dual mode, 110 cm mono.

Entrance people counter for retail floors, logging customers in and out for daily footfall reporting.

Guardia in/out people counter for shop doorways, feeding hourly traffic data into staffing decisions.

Three-way people counter that separates walk-ins from passers-by at the shopfront.

Entrance people counter feeding footfall data to head office for branch-by-branch comparison.

Handheld terminal with a built-in receipt printer for billing away from a fixed till.

Handheld UHF RFID reader for stock counts, cycle counts and finding a single tagged item.

UHF RFID hard tag sized for rings, chains and small jewellery display trays.

Wall-mounted indoor siren that makes an intrusion impossible to ignore across a shop floor.

RF hard tag with a sealed dye vial that stains the garment if the tag is forced off the rail.

Wire lanyard loop that attaches a hard tag to goods a pin cannot pierce — bags, shoes, luggage.

Five-inch wire lanyard for attaching a hard tag to shoes, bags and other goods you cannot pin.

Longer 6.5 in wire lanyard for bulky fixing points — handles, straps and thick zip pulls.

Non-magnetic detacher for hard tags and lock types a magnetic puck will not open.

Bench tool for checking whether a detacher magnet still has the pull to release hard tags.

Small square RF hard tag for lightweight garments and accessories a full-size tag would mark.

Blank NFC card for staff ID, door access and tap-based loyalty or membership schemes.

Wireless intrusion alarm kit - hub, contacts, motion detector, remotes - for small retail units.

Ceiling-mounted footfall sensor from Delopt for store entrances, counting in and out over PoE.

Slim AM pencil tag for garments where a bulky hard tag would crease or mark the fabric.

Black AM pencil tag for dark garments, where a white tag is the first thing a customer sees.

Guardia's entrance counting platform: in, out and passing traffic, with group de-duplication.

Wireless PIR detector that covers open floor, aisles and stockrooms once the shop is closed.

Power-over-Ethernet switch to run RFID readers, cameras and networked gates from one cabinet.

Replacement power supply for EAS pedestals, in AM and RF versions.

Unencoded UHF RFID tag supplied blank so the retailer writes its own EPC data.

RFID label printer that prints the artwork and encodes the tag chip in one pass.

Fixed UHF RFID reader and antenna for permanent read points at doors, tills or stockroom gates.

Desktop UHF RFID reader/writer for encoding tags and checking what is already on them.

Long-range handheld UHF RFID reader for counting deep racking and large sales floors.

Counter-top RFID tray that reads every tagged item placed in it, for till and jewellery counts.

Blank UHF RFID card for asset tags, staff passes and reusable item tracking.

Transparent acrylic Sensormatic AM pedestal: 2.0 m on labels, 2.6 m on hard tags in dual mode.

Wider acrylic Sensormatic AM pedestal: 2.4 m on labels, 3.0 m on hard tags in dual mode.

Counter-top AM label deactivator in the build made for metal checkout surfaces.

1.5 m ABS Sensormatic pedestal covering 1.8 m between a pair, extendable to 3.6 m with three.

Sensormatic's AM adhesive label, 44.6 × 10.16 mm, for shops already running 58 kHz Sensormatic gates.

Sensormatic APX barcode-face AM label, 44.6 × 10.16 mm, for stock that ships before it sells.

Self-contained Sensormatic AM pedestal, 1.8 m between posts, with no external controller.

Blank-faced Sensormatic AM label, 44.6 × 10.16 mm, for packs where the artwork must stay readable.

Transparent acrylic AM pedestal at 58 kHz — labels to 1.8 m, hard tags to 2.8 m.

Slim 20 mm acrylic AM pedestal: labels to 1.8 m, hard tags to 2.4 m at 25 W.

Acrylic AM pedestal with Wi-Fi servicing and CCTV trigger, 2.0 m detection in dual mode.

Clear acrylic AM pedestal with 1.8–2.6 m detection, for wider shop exits.

Wide-exit acrylic AM pedestal with 2.2–3.2 m detection from a 520 mm panel.

Very slim 300 mm acrylic AM pedestal at 14 kg, for narrow entrances.

Rimless acrylic AM pedestal with app-based remote tuning and mono, dual or trio setup.

Acrylic AM pedestal, labels to 2.0 m and hard tags to 3.0 m, from a 450 mm panel.

Open-frame acrylic AM pedestal with built-in people counting and 2.5 m hard-tag reach.

Entry-level ABS AM pedestal on the F22 board, with optional stainless covers and ad space.

Under-floor concealed AM antenna with 2 m hard-tag height, for entrances that must stay clear.

ABS-bodied acousto-magnetic pedestal in the Sentra range; specification to be confirmed.

Walk-through metal detector archway for entrance screening at showrooms, offices and event doors.

Slim transparent acrylic RF pedestal, 1.6–2.4 m detection from a 20 mm panel.

8.2 MHz acrylic RF pedestal at 10 W, hard tags to 2.4 m on the dual board.

Acrylic 8.2 MHz RF pedestal reading 3 × 3 cm labels to 1.5 m, large square tags to 2.0 m.

Silver aluminium-and-acrylic RF pedestal, 12.5 kg, hard tags to 2.4 m at 8.2 MHz.

Full-acrylic RF pedestal with Wi-Fi servicing and CCTV trigger, 1.8 m on 50 mm hard tags.

Transparent acrylic UHF RFID exit pedestal for stores running item-level tagging.

Overhead UHF RFID reader that covers a doorway from the ceiling with no floor pedestal.

Long-range integrated UHF RFID reader with a built-in antenna, for gates, yards and vehicle access.

Sentra's general-purpose 45 × 11 mm AM label for non-metallic packaged goods.

Insertable Sentra AM label, 45 × 11 mm, hidden inside the packaging instead of stuck on the outside.

Sentra AM label specified for jewellery and small high-value display stock.

Alarm beacon that makes an EAS activation visible across a noisy shop floor.

Alarm siren for the shopfront, where the noise has to carry beyond the unit itself.

RFID-triggered display that shows product information when a shopper lifts a tagged item.

Wireless smoke detector that reports to the alarm panel as well as sounding locally.

TagLock's everyday AM adhesive label, the running consumable for any 58 kHz acousto-magnetic system.

Small UHF RFID soft label for jewellery tickets, where a hard tag would mark the piece.

Pocket-format AM label that slips inside a garment, bag or shoe instead of sticking to it.

External alarm speaker for EAS gates where the built-in sounder is not loud enough.

Sunmi handheld terminal with an integrated receipt printer for billing away from the counter.

Replacement pins for reusable hard tags, the part that goes missing fastest.

Champagne-gold aluminium AM pedestal with a built-in advertising panel, hard tags to 2.4 m.

Grey anodised aluminium and acrylic AM pedestal, hard tags to 2.4 m at 58 kHz.

Hand-held detacher for reinforced multi-pin hard tags, for staff working away from the till.

Electronic detacher recessed into the checkout counter for reinforced multi-pin hard tags.

Aluminium-alloy RF pedestal reading 5 × 5 cm labels to 150 cm in dual configuration.

Long, narrow UHF RFID label made to sit in a book's spine gutter for library stock control.

Printable UHF RFID paper label for general retail item tagging and price tickets.

Shock detector for shutters, glass and safes - catches a break-in attempt before anything opens.